DC-II 7000/6000

DC-II 7000/6000


Mesin Fuji Xerox DocuCentre-II 7000/6000 adalah pintu gerbang Anda ke dunia bisnis. Dengan metode yang cepat, mudah dan efisien mesin Fuji Xerox DocuCentre-II 7000/6000 dapat dengan mudah digunakan di kantor Anda.
Mencapai kinerja yang tinggi dengan pengolahan dokumen yang cerdas dan profesional setiap saat.

  • Mengatur dan melacak pemakaian mesin dengan Internal Auditron atau Xerox Standard Accounting. Internal Auditron dapat mengatur user boleh menggunakan semua fungsi copy, print, scan dan fax atau beberapa fungsi tertentu saja. Dengan menggunakan Xerox Standard Accounting data penggunaan mesin dapat diambil dan ditampilkan dalam bentuk file CSV untuk digunakan pada aplikasi akuntansi dan spreadsheet.
  • Memiliki FCOT (First Copy Output Time) yang cepat, mencapai 3 detik saja, dan kecepatan copy sampai dengan 75 ppm.
  • Build Job. Fitur ini memudahkan Anda dalam melakukan penggabungan dan manipulasi dokumen hardcopy seperti membagi pekerjaan dalam beberapa segmen, membuat pengaturan yang berbeda-beda untuk setiap pekerjaan.
  • DADF (Duplex Automatic Document Feeder) berkapasitas tinggi memungkinkan Anda untuk melakukan scanning sampai dengan 75ipm untuk Hitam-Putih. Memiliki panel User Interface berwarna dengan ukuran besar, yaitu 10,4 inch yang memudahkan penggunaannya.
  • Copy with overlay. Sebelumnya sebuah gambar hanya dapat dimasukkan sebagai form overlay dengan proses printing. Dengan fitur ini memungkinkan Anda untuk melakukannya dengan proses copy.
  • Hasil scanning dokumen bisa dalam format TIFF, multi-page TIFF, PDF atau XDW. Distribusi dari dokumen hasil scanning dapat ditujukan ke PC, SMB, FTP atau e-mail.
  • Paperless faxing dengan PC Fax dimana Anda tidak perlu mencetak dokumen untuk di-fax, melainkan cukup dengan mengirim fax langsung dari PCL Print Driver di PC Anda. Penerimaan fax pun dapat dilakukan secara elektronik tanpa mesin fax.

1-1        Specifications of Copier
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000

Type
Console type

Scanning resolution
600 x 600 dpi

Writing resolution
600 x 600 dpi(about equivalent to 2,400 dpi)

Warm-up time
30 sec or less (at room temperature 20°C)

Copy original
Max. 297X432mm(A3, 11X17”) for both sheet original and book original

Copy (paper) size
Max: A3 (297X420mm), 11X17”(279X432mm), Min: A5 (148X210mm)
(For Bypass Tray, Max: 12X18”(304.8X457.2mm)
Min.: Postcard (100X148mm)
Image loss: Within 4mm for lead edge, Within 4mm for trail edge, Within 4mm for rear/front side

Copy paper*
Tray: 52 - 200g/㎡, Bypass Tray :52 – 250g/㎡

First Copy Time (A4LEF) *2
3.0sec

Copy magnification
1:1±0.7%
1:0.500, 1:0.707, 1:0.816, 1:0.866, 1:1.154, 1:1.225, 1:1.414
1:0.25 - 1:4.00 (in 1% increments)

Continuous copying speed*3
B5LEF
79/68PPM

A4LEF/B5LEF/A5
75/65PPM

A4/B5
55/47PPM

B4
44/39PPM

A3
37/33PPM

Paper feed method/capacity*4
4,450Sheets 500X 2 Tray +1,490+1,860 +Bypass 100 sheets.
8,600 sheets with Bypass Tray& HCF (2tray) trays.

Number of continuous copy *5
9,999sheets

Power supply
AC220-240±10%/110V±10%, 10/15A for both 50/60Hz±3%

Max. power consumption
1.65KVA(110V AC)/ 1.7KVA(220V AC)/ 1.8KVA(230V AC)/ 1.9KVA(240V AC)
Low Power Mode: 158W
Sleep Mode: ApeosPort 6.4W(@230V AC)
DocuCentre 2.3W(@230V AC)
*Low Power Mode is not factory setting.

Machine size
W 620XD 779XH 1,152 mm
187Kg
W 1,491X D779 mm

Machine weight

Machine space

(With Bypass Tray fully extended)

*1.Copying may not be performed correctly depending on the conditions.
*2.The values may vary depending on the machine configuration.
*3.The speed may be reduced due to image quality adjustment.
*4. When using 80 g/m2 paper.
*5. The machine may pause temporarily to perform image stabilization.
 1-2        Specifications of Printer
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Type
Built-in type
Continuous printing speed
Equivalent to machine performance
Resolution
Output resolution
Standard: 600X600dpi(23.6X23.6dot/mm)
Super fine: 1,200X1,200dpi (47.2X47.2dot/mm)
Page description language
PCL6, PCL5e, Adobe PostScript3 (Option)
Emulation
ESC/P (VP-1000), HP-GL (HP7586B), HP-GL2/RTL (HP Design
Jet 750C Plus), PCL5/PCL6 (HP Color Laser Jet 5500), ESC/P,
ESC/P-K*1, KSSM*2, KS5843*2, KS5895*2
*1: Only for Traditional Chinese and Simplified Chinese models
*2: Only for Korean model
Supported protocol
Standard (Ethernet)
TCP/IP (SMB, LPD, Port9100, IPP), NetBEUI (SMB),
IPX/SPX (NetWare)
Supported OS
Standard
Microsoft® Windows® 2000,
Microsoft® Windows® XP,
Microsoft® Windows Server® 2003,
Microsoft® Windows VistaTM
Adobe PostScript®3 TM (Option)
Microsoft® Windows® 2000,
Microsoft® Windows® XP,
Microsoft® Windows Server® 2003,
Microsoft® Windows VistaTM,
Mac OS 8.6 - Mac OS 9.2.2 English,
Mac OS X 10.3.9 -10.4.9 English
Built-in font
Standard
PCL6/5: 82 European fonts, 35 Symbol sets
Adobe PostScript®3 TM (Option)
136 Roman fonts
Direct Print
Standard
PDF, TIFF
CPU
PowerPC e300 667MHz
Memory Capacity [Std/Max.]
256MB/768MB
Interface
Standard
Ethernet 100BASE-TX/10BASE-T
Option
USB2.0
1-3        Specifications of Network Scanner
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Type
Mono scanner
Scanning size
Max.:297X432mm(A3, 11X17”)
Scanning resolution
600X600dpi, 400X400dpi, 300X300dpi, 200X200dpi
(23.6X23.6dot/mm, 15.7X15.7dot/mm, 11.8X11.8dot/mm, 7.9X7.9dot/mm)
Scanning tone
1bit (Input: 8bit)
Original scanning speed*1
Monochrome: 75 ipm
Interface
Ethernet 100BASE-TX/10BASE-T
Save to Mailbox

Protocol
TCP/IP (Salutation, HTTP)
Output Format*2
Monochrome Binary:
TIFF, DocuWorks*3, PDF*3
Driver
TWAIN
Supported OS
Microsoft® Windows® 2000,
Microsoft® Windows® XP,
Microsoft® Windows Server® 2003,
Microsoft® Windows VistaTM
Scan to PC
Protocol
TCP/IP (SMB, FTP)
Supported OS
SMB:
Microsoft® Windows® 2000,
Microsoft® Windows® XP,
Microsoft® Windows Server® 2003,
Microsoft® Windows VistaTM,
Mac OS X 10.3.9/10.4.x
FTP:
Microsoft® Windows® 2000,
Microsoft® Windows® XP,
Microsoft® Windows Server® 2003,
Microsoft® Windows VistaTM,
Mac OS X 10.3.9/10.4.2/10.4.4 English,
NetWare® 5.11/5.12
Output Format
Monochrome Binary:
TIFF (Compression method: MH, MMR),
DocuWorks,PDF
Scan to Mail
Protocol
TCP/IP (SMTP)
Output Format
Monochrome Binary:
TIFF (Compression method: MH, MMR),
DocuWorks document, PDF
*1.The scanning speed varies depending on documents.
*2. When the driver is used, the output format depends on the application for the driver.
*3. Supported only when documents are received using Centre Ware Internet Services.
1-4        Specifications of Fax
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Original size for transmission
Max: A3, 11X17”, Long document acceptable (Max. length: 600mm)
Recording paper size
Max: A3, 11X17”, Min: A5
Transmission time*1
2 sec or more but below 3sec
Terminal Compatibility
UNIQUE G3, ITU-T G3
Scanning Density
Standard:
8X3.85 line/mm, 200X100dpi
Fine image quality:
8X7.7 line/mm, 200X200dpi
Super-fine image quality:
16X15.4 line/mm
Super-fine image quality (400dpi):
400X400dpi
Super-fine image quality (600dpi):
600X600dpi
Coding system
MH, MR, MMR, JBIG
Terminal speed
G3: 33.6/31.2/28.8/26.4/24.0/21.6/19.2/16.8/14.4/12.0/9.6/7.2/4.8/2.4kbps
Applicable line
PSTN (Subscribed telephone line), PBX
Maximum 3 lines*
*The optional Fax Kit (1line), additional G3 Port Kit (2lines) and Fax extension board kit are necessary
1-5        Specifications of Direct Fax
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Original size for transmission
A3, B4, A4
Communication speed
G3: 33.6/31.2/28.8/26.4/24.0/21.6/19.2/16.8/14.4/12.0/9.6/7.2/4.8/2.4kbps
Communication resolution
Standard:
200X100dpi(7.9X3.9dot/mm)
Fine image quality:
200X200dpi(7.9X7.9dot/mm)
Super-fine image quality:
400X400dpi(15.7X15.7dot/mm), 600X600dpi(23.6X23.6dot/mm)
Applicable line
PSTN (Subscribed telephone line), PBX, Facsimile communication network, Facsimile communication network (Max.G3-3 ports)
Supported OS*1
Microsoft® Windows® 2000*,
Microsoft® Windows® XP*,
Microsoft® Windows Server® 2003*,
Microsoft® Windows VistaTM*
* Also supported by the PostScript driver.
1-6        Specifications of Internet Fax
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Original size for transmission
A3, B4, A4
Scanning line density
Standard:
8X3.85 line/mm, 200X100dpi(7.9X3.9dot/mm)
Fine image quality:
8X7.7 line/mm, 200X200dpi(7.9X7.9dot/mm)
Super-fine image quality:
16X15.4 line/mm
Super-fine image quality (400dpi):
400X400dpi(15.7X15.7dot/mm)
Super-fine image quality (600dpi):
600X600dpi(23.6X23.6dot/mm)
Output format
Format: TIFF-FX, Compression method: MH, MMR, JBIG
Profile
TIFF-S, TIFF-F, TIFF-J
Supported protocol
Send: SMTP, Receive: SMTP, POP3
1-7        Specifications of Duplex Automatic Document Feeder
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Type of original feeder
Automatic duplex document feeder
Original size/type
Max:A3,11X17”Min.:A5/38 - 157g/m2
Duplex in Mono: 50 - 157g/m2
Original feeding capacity*1
150 sheets
Original exchange speed
(A4 LEF Simplex)
Mono: 75dpm








*1. When using 80 g/m2 paper

1-8        Specifications of Finisher
C-Finisher
C-Finisher Specification is follows. [Option]
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Tray type
Output tray
Sort/Stack (with Offset)
Finisher Tray
Sort (with Offset)/Stack (with Offset)
Paper size/Applicable paper
Output tray
Max.:12X18” (304.8X457.2mm), Min.: Postcard
52 - 270g/m2
Finisher Tray
Max.:12X18” (304.8X457.2mm), Min.:B5
52 - 200g/m2
Stacker capacity *1
Output tray
A4 500 sheet
Finisher Tray
Non Staple Case
A4 3,000 sheets, Paper of B4 or larger: 1,500 sheets, Mixed Stack*2: 300 sheets
Staple Case
A4 200sets or3,000 sheets, Paper of B4 or larger: 100sets,1,500 sheets
Mixed Stack*2 70 sets or 200 sheets
Staple
Max. stapled sheet
50 sheets (90g/m2 or less)
Staple paper size
Max.:A3, 279X432mm(11X17”), Min.:B5(LEF)
Staple position
1 position (Front, Rear/corner), 2 positions (Dual)
Punch
Paper size
Max.:A3, 279X432mm(11X17”), Min.:B5(LEF)
Number of punch hole
2/4 holes (Option: US2/3 holes)
Size/Weight
W693XD644XH1004 mm, 50Kg
Machine space with Finisher
(When connected to the main unit)

DocuCentre series models:
W1,874×D779mm(main unit + C-Finisher, when the bypass tray is extended completely)
*1. When using 80 g/m2 paper
*2.Larger size paper is stacked on top of smaller size paper.

C-Finisher with Booklet Maker
C-Finisher with Booklet Maker Specification is follows. [Option]
Item
DocuCentre-Ⅱ7000
DocuCentre-Ⅱ6000
Tray type
Top tray
Sort (with offset)/Stack (with offset)
Finisher Tray
Sort (with offset)/Stack (with offset)
Booklet Tray
Sort/Stack
Paper size/Applicable paper
Top tray
Max.:12X18” (304.8X457.2mm), Min.: Postcard
52 - 270g/m2
Finisher Tray
Max.:12X18” (304.8X457.2mm), Min.:B5(LEF)
52 - 200g/m2
Booklet Tray
Max.:A3, 12X18” (304.8X457.2mm), Min.:A4, 8.5X11” (216X279mm)
60 - 105g/m2
Stacker capacity *1
Top tray
A4 500 sheet
Finisher Tray
Non Staple Case
A4 1,500sheets, Paper of B4 or larger: 1,500 sheets, Mixed Stack*2 300 sheets
Staple Case
A4 200 sets or 1,500sheets, Paper of B4 or larger: 100sets,1,500 sheets Mixed Stack*2 70 sets or 200 sheets
Booklet Tray
20 sets
Staple

Max. stapled sheet
50 sheets (90g/m2 or less)
Staple paper size
Max.A3, 279X432mm(11X17”), Min.:B5(LEF)
Staple position
1 position (Front, Rear/corner), 2 positions (parallel)
Saddle stitching/ Center fold
Max. number of sheet
Saddle stitching: 15 sheets (90g/m2 or less), Center fold: 5 sheets
Paper size
Max.A3, 12X18” (304.8X457.2mm), Min.:A4, 8.5X11” (216X279mm)
Paper type
Saddle stitching: 60~90g/m2  Center fold: 60 - 105g/m2
Punch
Applicable paper size
Max.:A3, 279X432mm(11X17”), Min.:B5
Number of punch hole
2/4 holes (Option: US2/3 holes)
Size/Weight
W844XD644XH 1,004 mm, 81Kg
Machine space with Finisher
(When connected to the main unit)

DocuCentre series models:
W1,936×D 779mm (main unit + C-Finisher with Booklet Maker, when the bypass tray is extended completely)




*1. When using 80 g/m2 paper
*2.Larger size paper is stacked on top of smaller size paper.

Staple Finisher D2
Staple Finisher D2 Specification is follows. [Option]
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Tray type
Output tray
Sort/Stack
Finisher Tray
Sort (with Offset)/Stack (with Offset)
Paper size/Applicable paper
Output tray
Max.:12X18” (304.8X457.2mm), Min.: Postcard
52 - 270g/m2
Finisher Tray
Max.:12X18” (304.8X457.2mm), Min.:B5(LEF)
52 - 200g/m2
Stacker capacity *1
Output tray
A4 500 sheet
Finisher Tray
Non Staple
A4 3,000 sheets, Paper of B4 or larger: 1,500 sheets, Mixed Stack*: 300 sheets
Staple
A4 200 sets or3,000 sheets, Paper of B4 or larger: 100sets,1,500 sheets
Staple
Max. stapled sheet
100 sheets (52~80g/m2 or less)
*When using paper over A4, or 8.5 × 11", maximum stapled sheets is 65 sheets.
**Since a Z-fold A3 sheet is calculated as 10 A4 size sheets, the number will be reduced when Z-fold sheets are included.
Staple paper size
Max.:A3, 279X432mm(11X17”), Min.:B5(LEF)
Staple position
1 position (Front/corner, Center /dual, Rear/corner, dual)
2 positions (Dual)
Punch
Paper size
Max.:A3, 279X432mm(11X17”), Min.: B5(LEF 2 holes), A4 LEF 4 holes)
Number of punch hole
2/4 holes (Option: US2/3 holes)
52~200g/m2
Paper fold
(option)
Z fold
Paper size: A3S, 11X17”S,B4S
Paper type: 60~90g/m2
Tri fold
Paper size: A4S, Letter (8.5X11”)S
Paper type: 60~90g/m2
Interposer
Paper size
Max.:A3, 279X432mm(11X17”), Min.:B5LEF
Capacity*1
200 sheets
Paper Type
60~220g/m2
Size/Weight
W1.045XD725XH1,165 mm, 105Kg
When D2 Folder Unit is installed
W1,245×D725×H1,165mm, 145kg
Machine space with Finisher
 (When connected to the main unit)

DocuCentre series models:
W 2,337×D779mm (main unit + Staple Finisher D2,when the bypass tray is extended completely)
*1. When using 80 g/m2 paper

Booklet Finisher D2
Booklet Finisher D2 Specification is follows. [Option]
Item
DocuCentre-Ⅱ 7000
DocuCentre-Ⅱ 6000
Tray type
Top tray
Sort/Stack
Finisher Tray
Sort (with offset)/Stack (with offset)
Booklet Tray
Sort/Stack
Paper size/Applicable paper
Top tray
Max.:12X18” (304.8X457.2mm), Min.: Postcard
52 - 270g/m2
Finisher Tray
Max.:12X18” (304.8X457.2mm), Min.:B5(LEF)
52 - 200g/m2
Booklet Tray
Max.:A3, 12X18” (304.8X432mm), Min.:A4, 8.5X11” (216X279mm)
60 - 90g/m2
Stacker capacity *1
Top tray
A4 500 sheet
Finisher Tray
Non Staple Case
A4 2,000 sheets, Paper of B4 or larger: 1,500 sheets, Mixed Stack: 300 sheets
Staple Case
A4 200sets or2,000 sheets, Paper of B4 or larger: 100sets,1,500 sheets
Booklet Tray
20 sets
Staple

Max. stapled sheet
100sheets (52~80g/m2 )
*When using paper over A4, or 8.5 × 11", maximum stapled sheets is 65 sheets.
**Since a Z-fold A3 sheet is calculated as 10 A4 size sheets, the number will be reduced when Z-fold sheets are included.
Staple paper size
Max.:A3, 279X432mm(11X17”), Min.:B5(LEF)
Staple position
1 position (Front/corner, Center /dual, Rear/corner, dual)
2 positions (Dual)
Saddle stitching/ Center fold
Max. number of sheet
Saddle stitching: 15 sheets, Center fold: 5 sheets
Paper size
Max.:A3, 304.8X457.2mm(12X18”), Min.:A4, 8.5X11” (216X279mm)
Paper type
Saddle stitching: 60~90g/m2 , Center fold: 60~105g/m2
Punch
Applicable paper size
Max.:A3, 279X432mm(11X17”), Min.: B5(LEF 2 holes), A4 LEF 4 holes)
Number of punch hole
2/4 holes (Option: US2/3 holes)
52~200g/m2
Paper fold
(option)
Z fold
Paper size: A3S, 11X17”S,B4S
Paper type: 60~90g/m2
Tri fold
Paper size: A4S, Letter (8.5X11”)S
Paper type: 60~90g/m2
Interposer
Paper size
Max.:A3, 279X432mm(11X17”), Min.:B5LEF
Capacity*1
200 sheets
Paper Type
60~220g/m2
Size/Weight
W1,045×D725×H1,165mm, 130 kg
When D2 Folder Unit is installed :
W1,250×D725×H1,165mm, 170 kg
Machine space with Finisher
(When connected to the main unit)

DocuCentre series models:
W2,337×D779 mm (main unit + Booklet Finisher D2,when the bypass tray is extended completely)